Standard Power Auto Recall System
Product Code: SYS-A2-001
Standard Power Auto Recall Systems consist of a 29" or 39" Tornado amber LED lightbar or an Illuminated Roof Sign along with a Standard Power Auto Recall unit.
The Tornado PA Lightbar is an areodynamic unit with amber LED's behind UV stabilised polycarbonate amber lenses and a perforated opal centre section.
The units have 1 (29") or 2 (39") internally mounted 40 Watt speakers.
This lightbar is ECE R65 class 1 and ECE R10 approved and features unique LED warning modules with 45 LEDs per module.
Available 29” (740mm) or 39" (1000mm), the Tornado PA is pre-loaded with R65 approved double flash pattern.
The 29" version is supplied with rubber mounting feet while the 39" version is bolt fix.
ILLUMINATED ROOF SIGN:
An aerodynamically profiled, illuminated roof sign combined with a 360º high intensity LED beacon in Amber.
Manufactured in non-corrosive UV stable material the unit is supplied with two built-in 25w, 8 Ohm speakers for use with a PA system. Also available without livery as well as without speakers for use as roof top lighting/signage only.
The integral amber LED beacon is approved and certified to ECE R65 class II and is IP rated to IP66.
The rear of the unit has a red vinyl lining to eliminate white light to the rear of the vehicle.
STANDARD POWER AUTO RECALL UNIT:
The Standard Auto Recall Unit is a high quality public address amplifier with the facility to record and re-broadcast a message up to 45 seconds long.
The device has 2 x 22Watt 8 Ohm outputs and therefore requires 2 x 30Watt or 2 x 40Watts 8 Ohm speakers to provide optimum audio performance. Although the device may be used with a single speaker the audio output is then reduced. As the unit was originally developed to play back public announcements at a local street level when utility services would be interrupted, it is not suitable for long range use where we recommend our High Power Auto Recall System.
The recorded message is stored on a solid state electronic memory system, which means that there are no tapes or moving parts to go wrong. This also makes the unit immune to vibrations associated with mobile vehicle applications.
The in-built auto repeat facility ensures drivers can concentrate on the road without having to have the microphone in hand.